Analysis of The Potential for Utilizing Palm Waste as a Boiler Material in Steam Power Plant PT. Syaukath Sejahtera
DOI:
https://doi.org/10.30811/litek.v21i1.2Keywords:
Boiler, Shell, energy, Waste, FiberAbstract
Utilization of palm oil solid waste as boiler fuel is an option in the effort to manage waste in palm oil mills. This utilization is to realize the need for electrical energy for the process of generating electric power by generators. PT. Syaukath Sejahtera is a company engaged in the argo-industrial processing of palm oil into CPO (Crude Palm Oil), has its own power plant system with a total installed electric power capacity of 1000 kW. This research aims to study the potential utilization of palm oil solid waste as boiler fuel at PT. Syaukath Prosperous. After conducting a study by observing field data analysis, it is known that the potential amount of fuel (shells and fibers) is 9450 kg hour and the calculation of the need for boiler fuel is known to be 5149.34 kg/hour. The optimum mixture of waste palm shells and fibers for boilers in PT. Syaukath Sejahtera with a fuel mixture of 25% shells and 75% fiber, namely: Shells 1287.33 kg/hour and fibers 3862 kg/hour with a total steam produced of 20000 kg/hour. The total output of electrical energy from the steam turbine is 706.99 kW, while the electrical energy requirement is 651.14 kW. It can be concluded that the demand for electrical energy in the palm oil processing process at PT. Syaukath Sejahtera has been fulfilled.
Downloads
References
Suyitno, M. (2011). Pembangkit Energi Listrik. Jakarta: Rineka Cipta.
Indonesia, S. P. (2017). Statistik Perkebunan Indonesia Komoditas Kelapa.
Kunarto, K. (2018). Analisa Efisien Boiler Pabrik Kelapa Sawit Dengan Menggunakan Bahan Bakar Fibre Dan Cangkang. Penelitian Mandiri Universitas Bandar Lampung.
Permata, K. I. (2009). Studi Pemanfaatan Biomassa Limbah Kelapa Sawit Sebagai Bahan Bakar Pembangkit Listrik Tenaga Uap di Kalimantan Selatan (Studi Kasus Kabupaten Tanah Laut). In Prociding Seminar Nasional Teknologi Industri. Kalimatan.
Yatno. (2016). Studi Pemanfaatan Limbah Padat Kelapa Sawit Sebagai Bahan Bakar Pembangkit Listrik Tenaga Uap Guna Memenuhi Kebutuhan Energi Listrik Pada Proses Pengolahan Kelapa Sawit Di (PKS) PTPN IV Unit Usaha Adolina. Medan: Program Studi Teknik Elektro Universitas Muhammadiyah.
Ramadhan, E. R., Aiyub, S., & Zulfadli, T. (2023). ANALISIS PERBAIKAN TURBIN UAP 61-101-JT DI PT. PUPUK ISKANDAR MUDA. Jurnal TEKTRO, 7(2), 153-156.
Ariwan, M. R., Maimun, M., & Syahputra, R. (2023). Analisis Perubahan Beban Terhdap Kinerja Generator Di PT. PJB UBJOM PTMG Arun. Jurnal TEKTRO, 7(2), 176-183
Setiaji, N., Sumpena, S., & Sugiharto, A. (2022). Analisis Konsumsi Daya Dan Distribusi Tenaga Listrik. Jurnal Teknologi Industri, 11(1).
Saifuddin, M. A. H., Djufri, I. A., & Rahman, M. N. (2018). Analisa Kebutuhan Daya Listrik Terpasang Pada Gedung Kantor Bupati Kabupaten Halmahera Barat. Jurnal PROtek Vol, 5(1).
Ardiansyah, G., & Wahyono, E. B. (2022). Pemanfaatan Daya Listrik Bagi Pelanggan Tegangan Menengah. Jurnal Sains & Teknologi Fakultas Teknik Universitas Darma Persada, 12(1), 19-27.
Downloads
Published
Issue
Section
License
Copyright (c) 2024 Jurnal Litek : Jurnal Listrik Telekomunikasi Elektronika
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Jurnal Litek : Jurnal Listrik Telekomunikasi Elektronika is licensed under Attribution-ShareAlike 4.0 International
.
